Historical 11L EPS ≤10°C Packout Record

Historical Partial Record / ≤10°C

An 11L effective-payload EPS packout record that still needs full report support

The archived page lists a 21 L internal box volume and an effective payload space of approximately 11 L after cold-pack placement. The dimensional relationship is useful for review, but the surviving page does not contain the complete approved test report needed for commercial use.

Status da evidência: partial historical record

Known Values

Values preserved from the archived page

These values describe the earlier page record only. They are not a current specification, quotation or performance guarantee.

Recorded fieldArchived value
Caixa EPS400 × 290 × 470 mm external; 300 × 190 × 370 mm internal; 50 parede mm; archived listed internal volume 21 eu; archived box weight 0.66 kg
Effective payload space250 × 140 × 320 milímetros; archived page estimates approximately 11 eu
Cold packs14 pacotes; 0.38 kg cada; 5.32 quilogramas totais; archived phase-change point 0°C
Ambient recordConstant 32°C environment
Sensor recordSeven archived locations: 54.2, 56.5, 53.5, 52.9, 52.4, 51.2 e 51.8 h at or below the archived 10°C criterion
Archived packout record reference
Archived test-curve image retained from the earlier page.
Archived packout record reference
Archived packout photo retained from the earlier page. Confirm that it matches the quoted model and report revision.

Before Reuse

Evidence that must be confirmed

Do not qualify a shipment from this page alone. The following items are not completely documented here.

Configuration identity

  • Approved model drawing and bill-of-material revision
  • Payload type, massa, arrangement and starting condition

Test and approval record

  • Cold-pack conditioning procedure and exact packout layout
  • Logger IDs, calibration status and sampling interval
  • Raw curves, critérios de aceitação, número do relatório, revisão, deviations and approval

How to Use This Page

Use the record to prepare questions, not to approve a shipment

Confirm the product requirement

Use the approved product label, stability information or customer quality requirement to define the target range and any permitted excursions.

Match the exact packout

Confirm the box, compressas frias, carga útil, condicionamento, colocação, assembly and report revision as one complete system.

Compare route conditions

Review the expected ambient profile, temporada, transferências, atrasos, monitoring plan and acceptance criteria for the intended route.

Compare the 9L-named historical record

Pharmaceutical Use

Usar rota- and configuration-specific evidence

O WHO model guidance for time- e produtos farmacêuticos sensíveis à temperatura describes product-defined conditions and qualified transport systems. It does not certify icebagchina or validate this historical record.

Perguntas frequentes

Questions before using the archived values

Is the archived duration a shipping guarantee?

Não. It is a value reported for the earlier recorded setup. It cannot be transferred to a different payload, cold-pack condition, perfil ambiente, route or assembly.

What does the capacity name mean?

The archived page lists approximately 11 L of effective payload space after cold-pack placement inside a box with a listed 21 L internal volume. Confirm the approved drawing before relying on those dimensions.

Can this record qualify a pharmaceutical shipment?

Não. A pharmaceutical use requires the product-defined transport requirement and qualification evidence for the complete intended packout and route conditions.

What should be sent for a new review?

Send the product requirement, dimensões e massa da carga útil, rota, temporada, duração planejada, subsídio de atraso, preferred box size and available drawings or reports.

Content owner: bolsa de gelo. Page reviewed: 27 Agosto 2026. Values are transcribed from the existing page record and remain subject to document verification.

Need a current configuration review?

Send the payload, approved temperature requirement, rota, planned duration and any existing drawing or report. We will identify which values can be confirmed and what should be tested.

Send Project Details
Role até o topo