Upright footprint
The vertical format uses a different load orientation from a horizontal pizza-box carrier.
1 / 6 Flexible Thermal Packaging · Insulated Bags
Upright Insulated Pizza Delivery Backpack with Divider
An upright, front-opening insulated delivery backpack for pizza boxes and prepared-food delivery. The reference configuration includes a reflective inner lining, an internal shelf/divider, backpack-style shoulder straps and reflective trim. A complete delivery arrangement (packout) combines the product load, this carrier, any coolant and the closure method. Confirm box fit, divider configuration, materials and complete-system thermal performance.
OrientationUpright carrier
AccessFront-opening panel
Internal organizationShelf/divider; confirm position and removability
DimensionsModel-specific; confirm before ordering
Shipping configuration note:Match the upright carrier and divider layout to the pizza-box or meal-container geometry. Confirm the product load, any coolant, closures and handling route as one delivery configuration.
Product Overview
Upright Organization for Multi-Level Food Loads
The upright body and front-opening panel distinguish this model from a horizontal pizza-box carrier. The visible internal shelf or divider can support separate loading levels, subject to confirmation of its position, removability and load limit. Box fit, closure design, material build and carrying ergonomics must be selected for the actual delivery operation.
Front access
The front-opening panel provides direct access to the organized internal space.
Internal separation
The shelf/divider creates separate loading levels; confirm its attachment, dimensions and working-load limit for the selected model.
Carrying options
A top handle and backpack-style shoulder straps are visible; dimensions, adjustment range and working load require confirmation.
Reflective details
Reflective lining and exterior trim are visible, without an assigned reflectivity or safety rating.
System-based performance
Thermal results depend on the loaded carrier, closures, any coolant, route and operating discipline.
Typical applications
- Upright pizza and prepared-food delivery
- Multi-level meal-container transport
- Rider or driver delivery requiring organized access
Information needed for selection
- Product load (payload) dimensions, mass and starting condition
- Required product temperature range or holding objective and route duration
- Usable internal space or pallet footprint and load height, closure cycle and route exposure
Product role:This upright carrier provides an insulated, organized enclosure for food-delivery loads. Its reflective lining, internal shelf or divider and backpack-style carrying features support handling, but the bag alone does not establish a product-temperature range or hold time.
Product Parameters
Product Parameters
Model / CapacityUpright, front-opening pizza delivery backpack; common configurations around 41 × 40 × 47 cm (roughly ten 14–15 inch pizzas) or 35 × 35 × 60 cm (about 74 L)
Material & Structure1680D nylon Oxford or 840D Oxford outer; PE foam insulation; aluminum-foil inner lining
Insulation Thickness9 mm to 10 mm PE foam
Applicable Use CasePizza and hot food delivery by scooter, bicycle or on foot
Compatible Coolant OptionsNot typically required for hot pizza transport; chilled inserts can be fitted for mixed loads
Product Specifications
Upright Carrier Selection and Confirmation
Use the visible layout to review the delivery workflow, then confirm dimensions, materials, divider design and carrying data for the selected model.
Distinguishing formatUpright body with front access and internal divider
Fit inputPizza-box footprint, stacked height and load mass
| Specification | Reference option | Selection guidance |
|---|---|---|
| Product format | Upright front-opening insulated carrier | Confirm orientation and opening for the delivery workflow |
| Internal divider | Internal shelf/divider | Confirm position, removability, dimensions and load limit |
| External and internal dimensions | Model-specific | Match pizza boxes, containers and stacked load height |
| Materials and insulation | Reflective lining; complete layer construction is model-specific | Confirm outer fabric, insulation core, liner and thicknesses |
| Carrying and visibility features | Top handle, backpack straps and reflective trim | Confirm strap design, working load and any reflectivity requirement |
| Thermal performance | Complete-system dependent | Test with the intended load, closure cycle, coolant where used, route and ambient conditions |
Before ordering:The upright format is the defining selection feature. Final divider details, dimensions, materials, tolerances, working load and carton packing are controlled by the approved drawing and quotation; no universal hold time is assigned.
Use & Packout
Set the Divider and Load for Stable Delivery
Confirm the internal dimensions and divider arrangement before loading. If coolant is used, pre-freeze or otherwise condition it to the required starting state and keep it separated from food or packaging wherever the product specification requires.
Confirm box geometry
Check the maximum pizza-box or meal-container dimensions, stacked height and usable internal space.
Set the internal layout
Confirm the shelf or divider position and whether it is fixed or removable for the selected model.
Load and balance
Distribute the load within the working-load limit stated for the selected model, protect containers from compression and position any conditioned coolant according to the documented arrangement.
Close and verify
Secure the front and top closures, minimize open time and verify the loaded carrier under the intended delivery route and ambient conditions.
Complete transport configuration
Thermal performance depends on the complete load and route conditions.
Confirm the minimum and maximum product load, any coolant or other thermal-control component used, starting conditions, closure and opening frequency, route ambient-temperature profile and transit duration in a defined complete-configuration test or qualification protocol.
WHO pharmaceutical cold-chain shipping-container guidance
ISTA 7E thermal transport testing overview for parcel delivery
FDA sanitary-transportation responsibilities for applicable food operations
These references explain industry qualification and transport practices. They do not certify this product or replace testing of your complete packout. Using an ISTA 7E profile alone does not constitute ISTA certification.
Sizes and Capacities
Upright and slim-format builds sized to your pizza box footprint and stack height, from compact single-runner packs to high-volume 74 L configurations.
Outer Shell Specification
1680D nylon Oxford for maximum abrasion resistance on scooter duty, or 840D Oxford for a lighter, more economical body.
Insulation Layer and Thickness
9 mm to 10 mm PE foam, with heavier builds available for longer runs and mixed hot-side loads.
Interior Lining and Divider Set-Up
Aluminum-foil lining reflects heat back onto the food; internal divider arrangements are configured to keep boxes upright and separated in transit.
Backpack Harness and Carry System
Padded shoulder straps, chest strap, ventilated back panel and reinforced base, tuned to the rider's shift length and vehicle type.
Colors, Logo Printing and Branding
Custom fabric colors, panel printing and logo placement so the backpack doubles as mobile brand presence.
Project Configuration
Match the Upright Carrier to Your Pizza Boxes
Share the largest box footprint, stacked height, load mass, divider preference, carrying method and order volume. Material, artwork and packing options can then be reviewed for the selected configuration.
External and usable internal dimensionsDivider position and removabilityOuter material, insulation and linerBackpack straps, handle and working loadReflective trim and artwork requirementsCarton packing and order quantity
Product Documents
Request Documents for Your Selected Configuration
Available documents vary by model, material construction and project requirements. Ask us to confirm the files available for your quotation or sample.
Technical Data Sheet (TDS)
Dimensions, capacity where applicable, layer construction, closure details and carton-packing data for the selected model.
Material & Construction Information
Available layer, liner, insulation, closure and applicable material-compliance information for the selected configuration.
Product Drawing & Carton Data
Product dimensions, artwork area and carton data for the selected model.
Frequently Asked Questions
Before You Select This Product
Use these answers for initial selection. For ordering and packout setup, follow the specifications and instructions confirmed for your model.
This model uses an upright, front-opening layout with an internal shelf/divider and backpack-style shoulder straps. Product 6231 uses a horizontal, top-opening pizza-box layout with hand-carry straps. Confirm box dimensions and loading orientation before ordering.
The reference configuration includes a shelf/divider; confirm whether it is fixed, removable or adjustable on the model drawing.
No reflectivity class or visibility standard is assigned here. State any operational visibility requirement so the trim and documentation can be reviewed.
No universal duration applies to the bag alone. Verify the complete loaded system using the intended food temperature, box count, closure cycle, any coolant and delivery conditions.
Quote & Sample Request
Tell Us About Your Transport Configuration
Share the information below so our team can recommend a suitable product configuration.
- Product load (payload) weight, dimensions and starting temperature
- Required product temperature range or holding objective and route duration
- Usable internal space or pallet footprint, load height and closure requirements
- Ambient-temperature profile for the shipping lane
- Order quantity, printing and sample requirements
Selected product
Upright Insulated Pizza Delivery Backpack with Divider
We will review a standard or custom configuration after receiving your project details.
Our response will cover the selected model, available documents and sample options.