Collapsible VPU-Series Cooler Box
Fold-flat reflective carrier for return-friendly passive shipping configurations.



Compare insulated shipper formats that use vacuum insulation panel construction. Selection should be based on the payload, internal layout, packout components, route conditions and project requirements.
Open a product page to review the available format, model-specific information and enquiry options.
Fold-flat reflective carrier for return-friendly passive shipping configurations.
Removable reflective VIP insert for use with a dimensionally compatible protective cooler.
Protective soft outer carrier with rigid and reflective internal insulation components.
Rigid EPP outer cooler with a matched reflective VIP insulation insert.
Rigid passive-cooler family with PU-only and PU+VIP model options for qualified shipping packouts.
We asked about the usable space with the VIP insert in place. That made the comparison relevant to our goods, rather than just the outside size of the shipper.
Our quality team wanted the preparation and test details clear before moving ahead. It was helpful to discuss the complete configuration rather than the insulation panel on its own.
The sample helped our packing team work through the internal layout. We could see where the goods and coolant would sit and which details still needed checking before testing.
VIP Insulated Shippers
Compare the VIP shipper formats available in this category. Capacities, dimensions and constructions are listed as a collection because they are model-specific. Where a model offers several sizes, the size set is shown together — confirm the exact model, controlled drawing and sample before ordering, as nominal capacity is not the same as unobstructed usable space.
| Product | Model / nominal capacity | External & internal dimensions | Insulation structure | Compatible coolant |
|---|---|---|---|---|
Collapsible VPU-Series Cooler BoxCollapsible reflective shipping box
|
VPU series; capacity specified to order | Assembled and folded sizes to be confirmed for the selected model (external, internal and usable space). Fold-flat return format. | Collapsible reflective insulation body insulated with VPU (VIP + PU composite); folding wall structure. | Ice packs, gel packs or PCM panels |
Removable VIP Insulation InsertInsert or liner for a compatible cooler
|
Sized to the host cooler; supply scope (insert / liner / matched cooler) per quotation | Panel dimensions matched to the host cooler internal dimensions — confirm on the assembly drawing. | Replaceable VIP insert; VIP panel thickness 6–30 mm within the 15–50 mm total build. A compatible outer cooler is required. | Ice packs, gel packs or PCM panels used alongside the insert |
VPU-Series Soft-Sided Cooler BoxSoft-sided carrier with rigid insert
|
100 L nominal (capacity basis to confirm from current drawing) | External and internal dimensions to be confirmed from the current drawing. | Soft-sided outer shell with rigid inner liner, insulated with VPU (VIP + PU composite). Chilled operation at 2–8 °C (applicable range). | Ice packs, gel packs or PCM panels |
EPP Cooler with VIP InsertRigid EPP outer case + VIP insert
|
34 L, 43 L, 60 L, 81 L, 108 L |
34 L — 600 × 400 × 260 mm 43 L — 480 × 380 × 400 mm 60 L — 560 × 440 × 375 mm 81 L — 660 × 510 × 385 mm 108 L — 660 × 510 × 478 mm L × W × H (external). Internal and usable space to be confirmed per model. |
Rigid moulded Expanded Polypropylene (EPP) outer shell combined with a reflective VIP insert. | Ice packs, gel packs or PCM panels |
PU-Only and PU+VIP Cooler Box FamilyRigid passive cooler box
|
PU-Only and PU+VIP; effective volumes 9, 27, 50, 110, 152 L Model codes: HZ-E9L-P, HZ-E27L-P, HZ-E27L-VP, HZ-E50L-VP, HZ-E110L-VP, HZ-E152L-VP |
108 L class — 660 × 510 × 478 mm (L × W × H); other volumes built to order. Confirm current drawing. | Rigid moulded polyurethane (PU) foam body with an optional VIP composite build. PU-only or PU+VIP selected per model. | Ice packs, gel packs or PCM panels |
Scroll the table sideways on smaller screens.
Configuration options
Standard models can be reviewed first. If your payload, route or handling process needs a different arrangement, these are the points we confirm with you before production.
Choose a documented model, or discuss a dedicated footprint around your payload, crate, rack, trolley or delivery format.
Where a model offers several sizes, the size set is confirmed against the controlled drawing — including external, internal and unobstructed usable space.
VIP panel thickness and PU layer thickness within the 15–50 mm build, with a choice of glass fibre or fumed silica VIP core.
Dividers, trays, inserts and base liners can be defined to keep payloads stable and separated inside the enclosure.
Ice-pack, gel-pack or PCM placement is configured after the payload, temperature band and delivery requirements are known.
Product options can include colour, branding, label panels and handling graphics for fleet or customer identification.
Collapsible formats support compact empty-return planning; confirm the assembled and folded envelope and the approved fold sequence.
Use a sample and the approved drawing to confirm fit, closure, included components and the final configuration.
Share the payload dimensions, required usable space, coolant and divider arrangement, handling process, route, branding, sample and order requirements.
Share the required shipper format, internal layout, panel arrangement, outer case, marking and order requirements.