Source: Central News Agency; English source: Taiwan News; technical supporting source: Economic Daily News
Chiayi’s Smart Cold Chain Center Connects Pre-Cooling, Traceability and Produce Distribution
What Happened
Chiayi County has broken ground on a new regional cold chain logistics center for agricultural and food products in Puzi City, Taiwan.
The project is supported by Taiwan’s Ministry of Agriculture and will be developed on 3.9 hectares of land leased from Taiwan Sugar Corporation. Development will take place in two phases through a combined ROT and BOT public-private partnership structure.
Phase one will use 1.95 hectares for a government-funded, 4,550-square-meter cold chain logistics center. After construction, operations will be transferred to a private-sector partner under the ROT model. Phase two will use the remaining 1.95 hectares for privately developed processing, marketing, foodservice and agricultural-waste reuse activities.
Total project investment is approximately NT$348.9 million, or around US$11 million. Taiwan’s Agriculture and Food Agency is providing approximately NT$314 million, with Chiayi County contributing NT$34.9 million. Completion is expected in late 2027, while the reported construction schedule is approximately 330 calendar days.
The facility will include frozen, refrigerated and other controlled-temperature working areas, produce pre-cooling, inbound and outbound staging, grading and packing zones, and dedicated loading docks. Planned technology includes differential-pressure pre-cooling, vacuum pre-cooling, IoT-based temperature control, big-data traceability and liquid-nitrogen individual quick freezing.
How It Works
The center is intended to begin temperature management closer to the production source.
Fresh produce continues to generate heat after harvest. If field heat is not removed quickly, respiration and moisture loss can reduce firmness, appearance and remaining shelf life before the product reaches a wholesale market, retailer or export customer.
Pre-cooling addresses this initial heat load. Differential-pressure or forced-air pre-cooling creates a pressure difference that draws refrigerated air through cartons or produce containers. The effectiveness of the process depends on vent design, carton alignment, pallet configuration and unobstructed airflow.
Vacuum pre-cooling uses reduced air pressure to promote rapid evaporation of a small amount of product moisture, removing heat in the process. It can be effective for selected porous or leafy products, but it is not automatically suitable for every fruit or vegetable. Commodity characteristics, moisture-loss tolerance and packaging must be evaluated before use.
The planned liquid-nitrogen IQF system addresses a different requirement. Individual quick freezing is intended to freeze product pieces rapidly and separately, helping avoid large frozen blocks and supporting downstream processing or retail applications. Product preparation, food safety controls and packaging remain important even when freezing occurs quickly.
The warehouse will also include frozen, chilled, low-temperature and medium-temperature operating zones. Multi-temperature design can support a broader range of crops and processed products, but it requires strict zoning. Products must be assigned according to their specific temperature, humidity and airflow requirements rather than placed in the nearest available room.
IoT-based monitoring will allow temperature and equipment data to be collected continuously across storage and handling zones. A well-designed platform can alert operators to abnormal temperature movement, door-open events, refrigeration faults or extended dwell time.
The big-data traceability system is intended to connect physical product handling with information such as supplier, batch, receiving time, storage location, processing event and outbound destination. That connection is important because temperature records alone do not identify which lot or customer order was exposed during an incident.
The loading dock and temporary staging areas will be critical control points. Even a well-designed cold room can lose value if products remain in warm receiving areas, wait for vehicles or move through poorly sealed docks. Appointment scheduling, rapid doors, insulated dock interfaces and disciplined loading procedures should therefore be incorporated into the operating model.
Why It Matters
Chiayi is one of Taiwan’s major agricultural regions but has lacked an integrated low-temperature logistics center capable of combining post-harvest handling, storage and distribution. The new facility is intended to reduce breaks between production and market delivery that can damage crop quality and weaken prices during peak harvest periods.
The project is important because it treats cold chain as more than warehouse storage.
A traditional cold room may hold products after they arrive, but it does not necessarily provide rapid pre-cooling, grading, packaging, freezing, inventory visibility or coordinated dispatch. Chiayi’s design combines these activities within one regional platform.
Taiwan’s Agriculture and Food Agency cited results from its broader cold chain development program showing that pineapple exports increased from approximately 2,000 metric tons to 20,000 metric tons annually, product shelf life was extended by around three times and loss rates fell from 25% to 10%. These figures describe wider program outcomes and should not be interpreted as guaranteed results for the Chiayi facility, but they illustrate the commercial objectives behind the investment.
The agency also estimated that cold chain improvements can reduce agricultural losses by approximately NT$580 million annually across the relevant program context. Again, the eventual performance of the Chiayi center will depend on utilization, commodity mix, operating quality and downstream transport rather than building technology alone.
The project can also support supply-and-demand balancing. During a strong harvest, producers frequently face pressure to sell immediately before quality declines. Pre-cooling and controlled storage can create additional time for grading, processing, domestic allocation or export preparation.
That additional time can improve commercial decision-making, but cold storage cannot indefinitely preserve fresh produce. Every commodity has a limited storage window, and incorrect temperature or humidity can create chilling injury, moisture loss, decay or other quality problems.
The public-private development model is another notable feature. Government funding can deliver the initial infrastructure, while private operation can bring commercial discipline, customer acquisition and day-to-day logistics expertise. The second-phase BOT component may create additional revenue through processing, marketing, foodservice and waste-reuse activities.
The main risk is coordination. A technologically advanced center may underperform if growers do not pre-book capacity, packaging is incompatible with airflow, collection transport is delayed or customers do not provide reliable volume forecasts.
B2B Impact
For growers and agricultural cooperatives, the center may provide access to pre-cooling, grading, storage and consolidation services that would be difficult to develop individually.
Users should understand the facility’s receiving standards before harvest. Relevant requirements may include product maturity, field temperature, crate or carton design, pallet dimensions, cleanliness, lot identification and maximum time between harvest and pre-cooling.
For produce exporters, the facility can support more consistent preparation for international markets. Export programs should integrate commodity-specific pre-cooling, packaging ventilation, humidity management, phytosanitary inspection, pallet stability, reefer-container loading and data logger placement.
For retailers and foodservice buyers, improved regional cold chain infrastructure can support more predictable product quality and replenishment. Buyers may be able to receive more consistent specifications because sorting, cooling and consolidation occur before products enter long-distance distribution.
For cold chain 3PLs, the facility creates opportunities in refrigerated collection, cross-dock operations, regional distribution and export-container movement. Transport capacity should be synchronized with warehouse workflows so that the value created by pre-cooling is not lost during uncontrolled pickup or delivery.
For refrigeration and equipment suppliers, the project demonstrates demand for integrated systems rather than isolated cold rooms. Potential requirements include pre-coolers, blast or IQF freezing, insulated panels, refrigeration racks, evaporators, high-speed doors, dock equipment, sensors and control platforms.
For packaging suppliers, forced-air pre-cooling makes carton and crate design especially important. Vent openings must align when cases are stacked, and packaging must maintain structural strength under humidity and low-temperature conditions.
Reusable plastic crates may support ventilation and repeated handling, while corrugated cartons may require moisture-resistant materials and carefully designed airflow openings. The best solution will depend on commodity, transport mode and customer requirements.
For monitoring and traceability companies, the IoT and big-data components create an opportunity to link environmental data with inventory records. Systems should allow operators to identify which lots were in a specific zone during an alarm, how long they were exposed and where they were subsequently shipped.
For processing companies, the second phase may support value-added activities such as cutting, freezing, packing or converting surplus crops into longer-life products. These services can help reduce waste when fresh-market demand is insufficient, although they require their own food safety and quality controls.
For public agencies and infrastructure investors, the ROT+BOT structure provides a test of whether public investment and private operation can produce a commercially sustainable regional cold chain platform. Performance should be measured through utilization, product loss, energy use, farmer access, service cost and customer outcomes rather than construction completion alone.
The wider lesson is that agricultural cold chain performance begins immediately after harvest. Chiayi’s project brings pre-cooling, multi-temperature storage, rapid freezing, traceability and market distribution into one regional system. Its success will depend on whether technology, packaging, transport and producer participation operate as a continuous chain rather than as separate services.